Home School Dads

Line


Spacespace
Message Boards
Stripes

space
Home School Dads
A Website for Fathers who Home School
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Cheap Jerseys Free Shipping

 
Post new topic   Reply to topic    Home School Dads Forum Index -> General Discussions
View previous topic :: View next topic  
Author Message
yellowbaby520



Joined: 07 Sep 2017
Posts: 103

PostPosted: Tue Sep 26, 2017 4:11 am    Post subject: Cheap Jerseys Free Shipping Reply with quote

NIS-CO Company offers various models of Make-Up Air Units for larger industrial plants ventilation requirements.

Negative Air Pressure in industrial manufacturing facilities can create problems such as:

* Exhaust fans losing performance Cheap Jerseys China , as the building pressure becomes negative.

* Pilot light outages and exhaust system failure on natural draft gas equipment.

* Cold air drafts and infiltration of dirt and contamination from outside.

* Difficulty opening or closing exterior doors.

NIS-CO air-handling units (AHU) can be used effectively for negative pressure control at manufacturing facilities:

Space Pressure Control is used to minimize and control the exchange of air between the building and the outside environment or from one building area to another. This may be accomplished in three ways:

- Constant air supply with variable-speed exhaust;

- Variable air supply with constant-speed exhaust;

- Variable Return-Air.

Constant air supply with variable-speed exhaust is recommended where a hot or contaminated environment must be ventilated while maintaining room pressure. Unit may be interlocked to that it only operates with the exhaust system.

Variable Air Supply with constant-speed exhaust may be preferred where fume exhausters or fume hoods are used to provide critical ventilation of contaminants from a “clean” environment while make-up air is used to maintain a positive pressure to prevent infiltration.

In either case, when the system is enabled, a pressure sensor in the building space monitors room pressure. When a high or low pressure reading is detected, the air supply or exhaust is adjusted to compensate.

When controlling a Variable Air Supply unit (or VAV Unit - Variable Air Volume), two methods are available:

- Damper Control - Unit discharge damper is adjusted using the damper motor.

- VFD (Variable Frequency Drive) – Controller adjusts the speed of the blower motor Discharge Damper adjustment is an older method of controlling discharge air volume. Its main advantage is that it only requires positional control of a small discharge damper motor. The major disadvantage is the wasted Horsepower of the blower motor at lower delivery rates.

In recent years, fan speed control using VFDs has become economical. In this application, a standard energy efficient motor is usually adequate down to 75% of normal motor speeds. For a fan speed down to 25%, a premium efficiency motor is required. Inverter duty motors are not usually necessary since at 25% of normal fan speed Cheap Jerseys , air delivery is minimal.

Variable Frequency Drives are also programmable. They are used to provide soft starts and to ramp motor speed up or down in response to signals from the control system.

Finally, in a generally “clean” environment without a critical need to remove large quantities of contaminants, a simple solution to building pressurization is a Return Air Unit with the return air damper motor controlled by building a pressure sensor. When building pressure increases, more inside air is returned through the unit, relieving the pressure. When building pressure falls, more outside air is supplied to the building in order to “pump up the pressure”. Precise control of building pressure by a single piece of equipment can thus be achieved.

Additional information can be found at the NIS-CO web site http:northernindustrialsupplycompanyproductsair_handling_units.

Oleg Cthetchel
Industrial Ventilation Systems Designer
NIS-CO Co.
nisco@nisco.net
http:northernindustrialsupplycompanyindex
http:northernindustrialsupplycompanyproductsindex From a business owner鈥檚 perspective, there are a number of important reasons to have your commercial HVAC system regularly and professionally maintained and serviced. First and most importantly, properly maintaining your HVAC system will help ensure the safety and comfort of your building鈥檚 inhabitants. A well-maintained HVAC system helps to maintain optimal indoor air quality and consistent Wholesale Adidas NHL Jerseys , comfortable temperatures, translating to healthy, productive employees. Proper HVAC system maintenance will also help keep your utilities costs down by ensuring maximum efficiency and will also help you avoid expensive repairs and replacements.
Like the systems themselves, maintenance requirements for commercial HVAC systems differ from residential systems. Furthermore, maintenance requirements for commercial systems will vary greatly based on what takes place in a particular facility. An office environment, for example, will have vastly different maintenance needs than a manufacturing facility. Because the amount of dust in the air will be much greater in certain types of facilities, the filters must be changed much more frequently.
As a basis for comparison Wholesale NHL Jerseys , most of our residential contracts involve changing the filters once or twice per year, with the understanding that the homeowners will change the filters monthly. In a commercial setting, we normally replace the filters at least four times a year; and facilities in which chemicals are used or where significant amounts of dust are present will require much more frequent filter changes.
With any commercial HVAC system, the evaporator coils will need to be cleaned at least once or twice per year. Because they are constantly damp, evaporator coils can harbor mold. And constant exposure to outdoor air can cause the coils to degrade. A special cleaning solution and techniques are required in order to ensure that all microorganisms are removed from the evaporator coils without damaging the coils themselves. Important procedures by a professional contractor will protect the . Wholesale NBA Jerseys Cheap Jerseys Wholesale Jerseys China Wholesale Jerseys China Wholesale Soccer Jerseys Cheap Jerseys China Cheap NFL Jerseys Wholesale NFL Jerseys Wholesale NFL Jerseys Wholesale NFL Jerseys
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Home School Dads Forum Index -> General Discussions All times are GMT - 4 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group
Space

Space
Space
space